Gradup

Why choose GRADUP swivel lifting rings ?

The CODIPRO team, always listening to the market and keeping an eye on its trends, works constantly to improve and develop its range of swivel lifting rings.

The GRADUP range has been especially developed to be the quintessential swivel lifting ring, particularly in terms of the quality of the raw materials used.

ADVANTAGES OF GRADUP LIFTING RINGS

OPTIMIZATION OF THE RAW MATERIALS

The optimization of the raw materials enables a significant improvement in WLL: up to 11% additional WLL (23% in safety factor 4).

IMPROVED WLL

A lifting ring is intrinsically stronger when it is used linearly. Under these conditions (= an angle of 0°), the GRADUP lifting rings offer improved WLL.

INDIVIDUAL TRACEABILITY NUMBER

Individually packed in a transparent, resealable pack containing the use recommendations and the certificate of compliance, each GRADUP lifting ring has an individual traceability number that is specific to CODIPRO.

SAFETY FACTOR

CODIPRO is offering certified lifting rings stamped with the 5:1 safety factor, which means they can be used throughout the world, including in the USA. CODIPRO also provides all the information needed for use with a 4:1 safety factor, as defined under the EN 1677-1 standard.

ANTI-CORROSION COATING

An anti-corrosion coating means that the unpainted parts of the CODIPRO swivel lifting rings are resistant to salt mist spray for 600 hours.

STAMPED TIGHTENING TORQUE

The tightening torque is stamped on all lifting rings in the GRADUP range.

MORE EFFECTIVE

The GRADUP lifting rings are 100% compatible with lifting rings in the existing SEB, DSR, DSS ranges, etc. They are simply more effective.

OUR QUALITY = YOUR SAFETY

In keeping with its mission statement, CODIPRO is especially concerned with the orange color of its lifting rings. This particular shade, which is always associated with SAFETY, allowing users to distinguish CODIPRO’s lifting rings from all the copies available on the market that could put operators’ lives in danger.

GRADUP RANGE

Double Swivel Ring: DSR

  • Metric thread : from M 5 to M 42 as standard; for loads from 0,07 t to 9,00 t
  • UNC thread: from UNC 1/4″ to UNC 1″1/4 as standard; for loads from 330 lbs to 13,500 lbs
  • Safety factor 4 and 5
  • Swiveling under load
  • Usable for any kind of lifting operation
  • Two ways of tightening

Double Swivel Shackle: DSS

  • Metric thread : from M 24 to M 100 as standard; for loads from 4,50 t to 32,10 t
  • UNC thread: from UNC 1″ to UNC 2″1/2 as standard; for loads from 10,000 lbs to 55,000 lbs
  • Safety factor 4 and 5
  • Swiveling under load
  • Usable for any kind of lifting operation
  • Tightening by Allen key

Universal Swivel Shackle: Mega DSS

  • Metric thread : from M 64 to M 100 as standard; for loads from 26,00 t to 60,00 t
  • UNC thread: from UNC 2″ 3/4 to UNC 4″ as standard; for loads from 60,000 lbs to 110,000 lbs
  • Safety factor 4 and 5
  • Swiveling under load
  • Tightening by Allen key

Universal Swivel Shackle: Giga DSS

  • Metric thread : M 150 as standard; for loads to 125,00 t
  • Safety factor 5
  • Swiveling under load
  • Individual traceability number

Swivel Eye Bolt: SEB

  • Metric thread : from M 8 to M 48 as standard; for loads from 0,40 t to 16,00 t
  • UNC thread: from UNC 3/8″ to UNC 1″1/2 as standard; for loads from 1,200 lbs to 25,000 lbs
  • Safety factor 4 and 5
  • Swiveling under load
  • Safe alternative to DIN 580
  • Torque key adaptor available

Female double swivel ring: FE.DSR

  • Metric thread : from M 8 to M 22 as standard; for loads from 0,40 t to 4,50 t
  • UNC thread: from UNC 1/4″ to UNC 7/8″ as standard; for loads from 330 lbs to 9,800 lbs
  • Safety factor 4 and 5
  • Allows the use of the existing fixation point
  • Swiveling under load

Female double swivel shackle: FE.DSS

  • Metric thread : from M 24 to M 52 as standard; for loads from 4,50 t to 21,00 t
  • UNC thread: from UNC 1″ to UNC 2″ as standard; for loads from 10,000 lbs to 50,000 lbs
  • Safety factor 4 and 5
  • Allows the use of the existing fixation point
  • Swiveling under load

Swivel eye nut: FE.SEB

  1. Metric thread : from M 8 to M 36 as standard; for loads from 0,40 t to 11,00 t
  2. UNC thread: from UNC 3/8″ to UNC 1″1/4 as standard; for loads from 1,200 lbs to 13,800 lbs
  3. Safety factor 4 and 5
  4. Allows the use of the existing fixation point
  5. Swiveling under load

WHAT CERTIFICATIONS HAVE BEEN GIVEN TO THE GRADUP RANGE ?

 

All CODIPRO swivel lifting rings comply strictly with the points in the Machinery Directive 2006/42/CE.

The EN 1677-1 standard (January 2009) applicable to “forged steel components of Grade 8” is restrictive with regard to the quality of the steel that can be used. With its innovative GRADUP range, CODIPRO has gone further, using higher-performance steels.

CODIPRO has committed to complying with the essential points of the EN 1677-1 standard: the way in which the components must be produced, tested and certified.

All lifting rings in the GRADUP range also comply with the ASME B30.26-2010 standard. They can be used in the USA with no specific safety measures.