The ARC 50 is a lifting point specially designed for handling heavy loads. The ARC 50 particularly suited for lifting moulds. The lifting must be done in a linear way.
The ARC 50 has a safety factor of 4 and 5, which means that their breaking load is four or five times greater than the capacity indicated in the technical sheet.
The ARC 50 is specially designed for use with Elebia’s NEO 50 automatic hook. However, it can also be used in combination with other hooks, shackles with a diameter of less than 100mm or with the NEO 20 automatic hook.
Backed by its design department, CODIPRO is able to design customised central lifting rings for specific needs.
Each ARC is delivered with a user manual and a certificate of compliance.
The fields marked (*) are required
(Reference – SF 5.1)