GRADUP lifting rings are designed to lift heavy loads, ranging from 0.07 to 125 tons, which need to be turned or flipped. With a maximum swivel range of 360°, GRADUP rings can support the entire load in all mounting positions. The torque value marking on each ring helps to avoid the risks associated with screw twisting and breaking.
Every ring has its own individual traceability code for thorough tracking and is marked with a WLL (Working Load Limit) and the CODIPRO name.
The Quick Lift Rings have been developed in order to provide a lifting solution that combines quickness and safety. Thanks to a purely mechanical system composed of a button and a spring, they can be fixed much quicker than other lifting rings. They are designed to lift loads from 0.25 to 2.5 tons and are available for the DSR model in GRADUP steel or stainless steel.
All lifting rings have their own traceability code, the WLL and the name CODIPRO engraved. The documents related to the rings, such as the instruction manual or the certificate of conformity, are available via the management and traceability tool CODITRACER.
Stainless steel lifting rings provide better protection against rigorous environmental conditions. Available in either male or female versions, stainless steel rings can be used in the chemical industry, sea transportation industry, etc.
Every ring has its own individual traceability code for thorough tracking and is marked with a WLL and the CODIPRO name.
The lifting rings from our offshore range were designed to meet requirements from the maritime, offshore and wind power industries. CODIPRO has obtained a DNV GL “Type approval certificate” for a selection of its range of DSR and DSS lifting rings.
CODIPRO is offering two separate “offshore” ranges which are covered by the “TAS00001ZG Type Approval” certificate
Every ring has its own individual traceability code for thorough tracking and is marked with a WLL (Working Load Limit) and the CODIPRO name.
When pivoting and/or swivelling and tilting loads and for repeated applications, it is preferable to use universal-type rings with a lifting hook, such as the DSH model.
Every ring has its own individual traceability code for thorough tracking and is marked with a WLL (Working Load Limit) and the CODIPRO name.
PE.SEB anchor points are not lifting rings in the conventional sense. They are fixing points for fall protection equipment systems (PPE – Personal Protective Equipment).
PE.SEB rings can be permanently attached to a structure and thus be used as PPE.
ISO thread M 12 to M 24. Available in zinc-plated steel or stainless steel.
Welding lifting rings help to provide a welded gripping anchor point for lifting and securing loads of up to 10 tons.
Welding applications are strictly reserved for a welder who has the required qualifications based on EN 287-1.
Working load limit: 2.00 to 10.00 t / 4,400 lbs à 22,000 lbs. Instruction leaflet available upon request
The CSS central safety rings are specially designed for handling heavy loads. A single CSS lifting ring can lift up to 55 tons.
The SLM lifting system is particularly suited for lifting moulds of up to 80 tons.
The ARC 50 is a lifting point specially designed for handling heavy loads. The ARC 50 particularly suited for lifting moulds. A single ARC 50 can lift up to 50 tons.
The ARC 50 is specially designed for use with Elebia’s NEO 50 automatic hook.
